To set the required dialling type proceed as follows.
Access the programming phase ...
1
Press
a
.
a
è
2
Press
b
.
b
è
3
Press
4
(option number).
4
è
4
Select the required dialling type by pressing one of
the following keys:
1
= pulse dialling;
2
= DTMF dialling.
If pulse dialling is required select
1
1
è
5
Press
e
to confirm and quit.
e
è
Option 5) Dial-tone check
When this option is
disabled
, the B-TEL99 will dial the numbers, assigned
to the alarm channel in alarm status, without checking for the dial tone.
If, however, this option is
enabled
, the B-TEL99 will dial the programmed
numbers only when the
dial-tone
is detected, otherwise, it will release the
telephone line and restart the alarm cycle with the same telephone num-
ber: after 4 attempts the B-TEL99 will abandon the telephone number and
step to the successive number.
+
This option must be disabled during the test phase (telephone line discon-
nected), and also when the B-TEL99 is connected to telephone networks
with non-standard tones.
Default setting
The default setting is
1
"Disabled".
To enable/disable proceed as follows.
Access the programming phase ...
1
Press
a
.
a
è
2
Press
b
.
b
è
3
Press
5
.
5
è
4
Set the dial-tone check as required by pressing
one of the following keys:
1
= Disabled
2
= Enabled
1
or
2
è
or
5
Press
e
to confirm and quit.
e
è
PROGRAMMING
27
