INTRODUCTION
ATTENTION
This manual describes the use of the OmniaMOD-V2 in se-
curity systems, however, it is possible to use it for the remote control, via
telephone, of all types of systems that can transmit data with the ADEMCO
protocol (for example, the Bentel MD-COM digital communicator).
The
OmniaMOD-V2
Central Station is a main control unit which receives
information, via telephone, from remote security-systems. OmniaMod-V2
consists of:
Ø
MS-DOS personal computer (not supplied);
Ø
from 1 to 4
OmniaMOD-V2
modems (one modem supplied);
Ø
Central Station
and
Import Data
programs;
Ø
up to two printers (not supplied).
The Central Station permits:
r
reception of coded events from remote security systems;
r
identification of the type of event and location, by means of the client data-
base stored in the computer;
r
graphic presentation - map of the city;
r
graphic presentation of the event on the map, shown by the flashing of the
icon assigned to the client;
r
full archiving on the hard disk, of all events and operator actions;
r
sequential printing of all events;
r
event analysis according to selected filters;
r
archive printout according to selected filters;
r
multilayer password access;
r
event reception even when the operator is not logged in;
r
the possibility to control up to 4 telephone lines (with 4 OmniaMOD-V2 mo-
dems and a PC with 4 serial ports);
r
event reception from different types of control panels (Bentel, DSC, etc.);
r
online help.
INTRODUCTION
5
