Bentel Security FireClass100, Software Manual

Page: 23 / 48

System
Use the System sheet (figure 17) to program:
Ø
the system parameters (refer to "System" in the INSTALLATION MANUAL);
Ø
the
Welcome Message
(refer to "Welcome Message" in the INSTALLA-
TION MANUAL);
Ø
the
Language
used on the control panel display and Repeater panel display.
Alarm status
template
(Standard or
Extended)
This option will allow you to select the Alarm status template:
Standard
or
Extended
(refer to "Display Templates" in the "User Guide").
Reset to Slave
If this option is enabled,
Reset
,
Silence
and
Confirm
operations done at the
Master panel will affect selected or ALL the network Slave panels (in accord-
ance with the setting in the respective template on the Master panel).
Reset from Slave
If this option is enabled,
Reset
,
Silence
and
Confirm
operations done at a
Slave panel will affect the Master, which in turn will broadcast the com-
mand to selected Slave panels (in accordance with the setting in the re-
spective template on the Master panel).
Broadcast to
Slave
If this option is enabled, the Master panel will retrieve the system events,
save them to the Master log then broadcast them to all its Slave panels ex-
cept for the Slave panel it is communicating with. In this way, it will be pos-
sible to view the system status from all Slave panels (refer to "Centralized
Master Panel Log" in the "User Guide").
Figure 17 System sheet
Fire Software
23