Bentel Security FireClass100, Software Manual

Page: 12 / 48

Last Save
This parameter indicates the date of the last Save operation for
the customer account concerned.
The
Customer account
window provides the following options.
Automatic start
If you enable this option, the application will load the re-
spective customer account automatically each time the Fire Software appli-
cation opens.
Enable Graphic map management
This option will allow you to associate
the customer account with the
GMap
application.
Master Graphic map management
This option will allow you to associate
systems using
Master
and
Slave
panels (maximum 7 Slaves) with the
GMap
application. The
Set Slave
button will activate automatically.
Slaves settings
This option (see Fig. 5) will allow you to configure the
Slave panel network. If you click on
Slave
(bottom centre), the Slave panel
will be moved automatically to the top section of the window.
NOTE:
You must assign a different Name and Code to each Slave panel.
Print
This option will allow you to printout the currents settings.
+
To print the contents of the device windows (detectors, modules, zones,
bell outputs, etc.), right-click on the respective device and select
Print
.
Exit
Select
Exit
to close the application.
Figure 5 Slave Control panels
12
Analogue Fire Control Panels FireClass