background image

 

D-305831 BW-ODC

 

Installation Instructions 

BW-ODC

 

Bentel Security

 

 English 

 

PowerG, Outdoor Mirror PIR Motion Detector with Anti- masking and 
Built-In Camera

 

Installation Instructions 

 Italiano  

Rilevatore di movimento PIR a specchio, da esterno, con 
antimascheramento, e telecamera incorporata, PowerG 

Istruzioni di installazione 

 Polski 

 

Lustrzany czujnik ruchu PIR z funkcj

ą

 antymaskingu i wbudowan

ą

 

kamer

ą

, do zastosowa

ń

 zewn

ę

trznych

 

Instrukcja instalacji 

ENGLISH 

1. INTRODUCTION 

Note:

 Operations described in these instructions applies to BW control panels. For further information related to operations with a different 

control panel, refer to the control panel's instructions. 

The BW-ODC is a 2-way, wireless outdoor digital mirror PIR detector with built-in camera. Activated upon PIR detection or upon demand, the 
BW-ODC sends clear images to the Monitoring Station for alarm image verification. 

The PIR motion detector’s features are as follows: 

 

Operates with BW control panels (version 18 and higher) 

 

Patented 8 independent quad PIR detectors (Octa-QUAD

TM

) operating in true Quad configuration (patented) with true motion recognition 

(TMR) processing for each of the 8 PIR detectors 

 

Advanced Obsidian Black Mirror

TM

 optics (patent pending) 

 

Optimum performance even in poor weather conditions such as snow, rain, dust, wind, and direct sunlight 

 

Tamper protection prevents opening and removal from wall 

 

PowerG two-way Frequency Hopping Spread Spectrum FHSS-TDMA technology - provides robustness and reliability 

 

Built-in link quality indicators enable installer to check signal quality without physically approaching the control panel 

 

Robust housing with recessed window 

 

Smart anti masking distinguishes between masking spray and rain 

 

Alarm LED is visible in sunlight 

 

Automatic termination of walk-test after 15 minutes 

 

Microprocessor-controlled temperature compensation 

 

Immunity to small pets 

 

Built-in swivel bracket. 

The camera’s features are as follows: 

 

Up to 10 cameras can be enrolled 

 

Images multiplexed from all enrolled cameras 

 

Color and black & white images 

 Auto-setup 

 

Camera tuning by simple walk-test 

 

Day and night CMOS camera, with near IR illumination. This allows taking pictures in full darkness without letting the intruder know. 

 

Instant capture: guarantees capture of fast moving intruder. 

 

Optional AC power 

 

An event records 2 images per second. 10-15 images total 

2. INSTALLATION 

2.1 Installation 

A. 

Bracket installation (see Figure 2 on page 13). Fix the bracket firmly on a stable wall or pillar. The orientation of the fixed bracket must 
provide for the orientation of the detector to be as parallel as possible to the surveyed ground surface. 

B.

 Adjust the detector's horizontal and vertical angles (see Figure 3 on page 14), according to the surveyed ground surface. Set the vertical 

angle position depending on the mounting height and coverage distance that you require. See Figure 3 and Table 1 for details. The 
information refers to a relatively flat surveyed area. Verify the correct installation by using the walk test method. 

C. 

Fasten the detector to the bracket (see Figure 2 on page 13, step 4). 

D.

 To decrease false alarms, which can be triggered by pets, it is recommended to install the detector at a height of 2 to 2.5 meters from the 

ground surface. In addition, vertical adjustment must be fixed on #4 or #5 position. It is recommended to direct the detector on a 
background such as walls, houses, fences but not on open space. 

Installation Notes: 

The top cover should only be accessed by authorized service personnel or manufacturer. Do not obscure the detector field of view with large 
objects. Install in position such that expected intruder motion is perpendicular to the zones of detection. 
Alarms that could be triggered by conditions such as weather, blowing leaves and brush, or related environmental conditions, etc., need to be 
considered when assessing the installation and application. 

Table 1 – Vertical Adjustment Reference 

Mounting Height 

Nominal Coverage Distance

 

2m / 6.7ft

 

4m / 13ft

 

6m / 20ft

 

8m / 26ft

 

10m / 33 ft

 

12m / 39 ft

 

3.0m / 10 ft 

-  1 2 2 3 3 

2.5m / 8 ft 

1 1 2 3 4 

2.0m / 7 ft 

1 2 3 4 5 

1.5m / 5 ft 

2 3 4 5 5 - 

Summary of Contents for BW-ODC

















Reviews: