BENSHAW RSi H2P Series Instruction Manual Download Page 25

Page: 25 / 47

890053-02-00

Page

Parameter

Description

AP1-89 / MC2-27

Jockey Dly T

⚫

Sets the delay time to stop Jokey pump.

⚫

For MMC (Contactor Lag) and Network Fbk

◼

The parameter is not used.

AP1-90 (Interlock)

Ext. Mtr OL

◼

Yes/No

AP1-91 (Interlock)

Ext. Mtr OL T

⚫

Sets the delay time when exchanging the Main motor.

⚫

For MMC (Contactor Lag), when AP1-55 (Auto Ch Mode) is Main Exchange, the delay time is applied in
the following events.

◼

When the Main motor needs to be changed because an interlock was input for the Main motor.

◼

When the Main motor needs to be changed by the Alternate operation.

⚫

For Follow Lead, Fixed Lag, Network Fbk

◼

The parameter is not used. See

Section 13, Interlock Trip

AP1-94 / MC2-08

* Of Drives

⚫

For Follow Lead, Fixed Lag, Network Fbk

⚫

Sets the number of drives that are actually

operated

by the Lead/Lag system.

◼

Sets the number of drives

operated

in the Lead/Lag system. Compared to AP1-42 (* of Pumps)

which is the number of drives

connected

and can be larger than AP1-94. EX: if AP1-42 is set to “8”

and AP1-94 is set to “5”, only 5 drives are used, and 3 drives are in standby mode. Standby drives
can become part of the alternation sequence.

See

Section 17, Standby

⚫

For MMC (Contactor Lag)

◼

The parameter is not used.

AP1-95 / MC2-28
RunTimeMonitor

⚫

Shows the Pump number corresponding to the (Drive ID) set at COM-01.

◼

For the pump number (Drive ID) displayed, view Run Time parameters AP1-96 (PmpRunTime Day)
and AP1-97 (PmpRunTime Min).

⚫

Lead (+) drive can select all drive ID’s to view Run Time parameters.

⚫

Lag Drives will show their own ID number and cannot select other drive ID’s.

AP1-96 / MC2-29

PmpRunTime Day

⚫

Displays the number of operating days of the pump number (Drive ID) selected in AP1-95
(RunTimeMonitor).

AP1-97 / MC2-30

PmpRunTime Min

⚫

Displays the accumulated operating time (Hr:Min) of the pump number (Drive ID) selected in AP1-95
(RunTimeMonitor).

◼

When the operating time becomes 24:00, it changes to 00:00 and AP1-96 (PmpRunTime Day)
increases by one day.

⚫

NOTE: Parameters AP1-96 and AP1-97 are programmable. The run time can be set for a motor/pump
that has been in operation.

AP1-98 / MC2-31

PmpRunTime Clr

⚫

Resets the time of the selected pump number (Drive ID) in AP1-95. Resets both AP1-96 (PmpRunTime
Day) and AP1-97 (PmpRunTime Min).

Summary of Contents for RSi H2P Series
















































Search results

Summary of Contents for RSi H2P Series

Reviews:

Related manuals for RSi H2P Series

Brands by name

Popular brands

BENSHAW RSi H2P Series, Instruction Manual

Search results

Summary of Contents for RSi H2P Series

Reviews:

Related manuals for RSi H2P Series

Brands by name

Popular brands