Operation
47
English
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type.
See
"Selecting a picture mode" on page 34
for details.
Reference
Mode
Selects a picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below.
See
"Setting the User 1/User 2 mode" on page 35
for details.
Brightness
Adjusts the brightness of the image.
See
"Adjusting Brightness" on page 35
for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See
"Adjusting Contrast" on page 35
for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See
"Adjusting Color" on page 36
for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Tint
Adjusts the red and green color tones of the image.
See
"Adjusting Tint" on page 36
for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Sharpness
Adjusts the image to make it look sharper or softer.
See
"Adjusting Sharpness" on page 36
for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Brilliant Color
Adjusts white peaking while maintaining correct color presentation.
See
"Adjusting Brilliant Color" on page 36
for details.
Color
Temperature
See
"Selecting a Color Temperature" on page 36
for details.
3D Color
Management
See
"3D Color Management" on page 37
for details.
Save Settings
Saves the settings made for
User 1
or
User 2
mode.
Quick Auto
Search
See
"Switching input signal" on page 29
for details.
Color Space
Conversion
Only action for HDMI Input source.
2
. PI
CT
UR
E menu
3. SOUR
CE
menu
