Introduction
12
English
Remote control effective range
Infra-Red (IR) remote control sensor is located on
the front and the rear of the projector. The remote
control must be held at an angle within 30 degrees
perpendicular to the projector's IR remote control
sensor to function correctly. The distance between
the remote control and the sensor should not
exceed
7 meters (~ 23 feet).
Make sure that there are no obstacles between the
remote control and the IR sensor on the projector
that might obstruct the infra-red beam.
16.
POWER OFF
Turns off the projector. See
"Shutting down
the projector" on page 42
for details.
17.
S-VIDEO
Displays the S-VIDEO source selection. See
"Switching input signal" on page 29
for details.
18.
PC
Displays the PC source selection. See
"Switching
input signal" on page 29
for details.
19.
HDMI 2
Displays the HDMI 2 source selection. See
"Switching input signal" on page 29
for details.
20.
Right cursor/Panel Key Lock (
/
)
: Navigates and changes settings in the
OSD. See
"Using the menus" on page
25
for details.
: Activates panel key lock. See
"Locking
control keys" on page 39
for details.
21.
Down cursor/Keystone (
/
)
: Navigates and changes settings in the
OSD. See
"Using the menus" on page
25
for details.
: Manually corrects distorted images
resulting from an angled projection.
See
"Correcting keystone" on page
31
for details.
22.
ASPECT
Select the display aspect ratios. See
"Selecting the aspect ratio" on page 32
for details.
23.
CONTRAST
Displays the CONTRAST setting bar. See
"Adjusting Contrast" on page 35
for details.
24.
SHARP
Displays the SHARPNESS setting bar.
See
"Adjusting Sharpness" on page 36
for
details.
25.
TINT
Displays the TINT setting bar. See
"Adjusting Tint" on page 36
for details.
26.
COLOR
Displays the COLOR setting bar. See
"Selecting a Color Temperature" on page
36
for details.
27.
Blank
Hides the screen picture. See
"Hiding the
image" on page 39
for details.
28.
Freeze
Freeze/unfreezes the on-screen picture. See
"Freezing the image" on page 40
for details.
29.
TEST
Displays the test pattern.
App
rox.
±15
°
App
rox. ±
15°
