Operation
40
English
Freezing the image
Press
FREEZE
on the remote control to freeze the image. The word
'
FREEZE
' will display in the upper left corner of the screen.
To release
the function, press any key on the projector or remote control.
Even if an image is frozen on the screen, the pictures are running on the
video or other device. If the connected devices have active audio output,
you will still hear the audio even though the image is frozen on screen.
Utilizing FAQ function
The
INFORMATION
menu contains possible solutions to problems encountered by users
regarding image quality, installation, special feature operation and service information.
To get the FAQ information:
1.
Press
/
on the projector or press
MENU/EXIT
to
open the OSD menu and press
/
to highlight the
INFORMATION
menu.
2.
Press
to highlight
FAQ-Image and Installation
or
FAQ-Features and Service
based on the information
you want to know.
3.
Press
MODE/ENTER
.
4.
Press
/
to select a problem and press
MODE/ENTER
for possible solutions.
5.
Press
MENU/EXIT
to exit the OSD.
Operating in a high altitude environment
We recommend you use the
High Altitude Mode
when your environment is between
1500 m –3000 m above sea level, and temperature is between 5°C–23°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature
is between 5°C and 28°C. The projector will be over cooled, if you turn the mode on under
such a condition.
To activate the
High Altitude Mode
:
1.
Press
MENU/EXIT
and then press
/
until the
SYSTEM SETUP: Advanced
menu
is highlighted.
2.
Press
to
highlight
High Altitude Mode
and
press /
to
select
On
. A confirmation
message displays.
3.
Highlight
Yes
and press
MODE/ENTER
.
Operation under "
High Altitude Mode
" may cause a
higher decibel operating noise level because of increased fan speed necessary to improve
overall system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it may display
auto shut-down symptoms, which is designed to protect your projector from over-heating.
In cases like this, you should switch to High Altitude mode to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.
We recommend you use the High Altitude
mode by selecting it whenever your
environment is higher than 1500m.
Yes
No
Notice
Do you want to turn High Altitude
Mode ON?
