Operation
26
English
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an option
for setting up password security. The password can be set through the On-Screen Display
(OSD) menu. For details of the OSD menu operation, please refer to
"Using the menus" on
page 25
.
You will be inconvenienced if you activate the power-on lock functionality and subsequently
forget the password. Print out this manual (if necessary) and write the password you used in
this manual, and keep the manual in a safe place for later recall.
Setting a password
Once a password has been set, the projector cannot be used unless the correct password is
entered every time the projector is started.
1.
Open the OSD menu and go to the
SYSTEM SETUP: Advanced
>
Security
Settings
menu. Press
MODE/ENTER
. The
Security Settings
page displays.
2.
Highlight
Power on Lock
and select
On
by pressing
/
.
3.
As pictured to the right, the four arrow keys (
,
, , )
respectively
represent 4 digits (1, 2,
3, 4). According to the password you desire to
set, press the arrow keys to enter five digits for
the password.
4.
Confirm the new password by re-entering the
new password.
Once the password is set, the OSD menu returns
to the
Security Settings
page.
5.
To activate the
Power on Lock
function, press
/
to highlight
Power on Lock
and press
/
to select
On
.
The digits being input will display as asterisks on-screen. Write your selected password down
here in this manual in advance or right after the password is entered so that it is available to
you should you ever forget it.
Password: __ __ __ __ __
Keep this manual in a safe place.
6.
To leave the OSD menu, press
MENU/EXIT.
INPUT NEW PASSWORD
Back
MENU
