background image

Chapter 2

 

  Installation 

(2) Connect the 15pin D-Sub signal cable to the VGA (ANALOG) video port on the 

back of your monitor and computer. 

(2) Connect the 15pin D-Sub signal cable to the VGA (ANALOG) video port on the 

back of your monitor and computer. 

(3) Connect the 19pin DVI-D signal cable to the DVI (DIGITAL) video port on the 

back of your monitor and computer if its video card included DVI out terminal. 

(3) Connect the 19pin DVI-D signal cable to the DVI (DIGITAL) video port on the 

back of your monitor and computer if its video card included DVI out terminal. 

(4) HDMI Connecting: please refer to chapter 2.2.2.   

(4) HDMI Connecting: please refer to chapter 2.2.2.   

(5) Connect the Audio in terminal of your monitor and the speaker out terminal of 

your computer’s sound card using a stereo cable (sold separately

(5) Connect the Audio in terminal of your monitor and the speaker out terminal of 

your computer’s sound card using a stereo cable (sold separately). 

2.2.1.3 Plug your computer and the monitor power cable into a nearby outlet. 

2.2.1.4 Turn on your computer and monitor. If your monitor display an image, you have 

successfully installed the monitor. If the monitor does not display an image, please 

check all the connectons again. 

Note:  The  details  on  the  computer  connections  and  interfaces  are  contained  in  the 

operating manual for your computer. 

 

2.2.2 HDMI Connecting

 

You can enjoy better screen and sound quality through the HDMI cable or HDMI to 

DVI cable connecting to the digital output devices. 

2.2.2.1 Connecting the HDMI cable 

1) Connect one end of the HDMI cable (sold separately) to the HDMI port on the 

back of your monitor and the other end to the computer or other digital output 

devices, such as DVDs which have HDMI out terminals.   

2) Select HDMI by pressing the INPUT button. 

2.2.2.2 Connecting the HDMI to DVI cable 

1) Connect one end of the HDMI to DVI cable (sold separately) to the HDMI port on   

the back of your monitor, and the other end to the DVI terminal on the back of the 

computer  or  other  digital  output  devices,  such  as  DVDs  which  have  DVI  out 

terminals. 

2) Connect one end of an appropriate stereo cable (sold separately) to the Audio in 

port  of  your  monitor  and  the  other  end  to  the  speaker  out  terminal  of  your 

computer’s sound card or audio out terminal of your DVD.   

3) Select HDMI by pressing the INPUT button. 

 

Note:  HDCP  has  been  implemented  across  DVI  interface.  The  HDCP  specification 

provides a cost-effective and transparent method for receiving the highest quality 
digital entertainment content from HDMI compliant video sources. 

 

 

6

Downloaded from ManualMonitor.com Manuals

Summary of Contents for T261W
















Reviews: