![background image](http://html1.mh-extra.com/html/benq/sh915/sh915_user-manual_2734969065.webp)
Operation
65
USB Reader menu
The USB Reader menu will display only when USB Reader source is selected. This menu is
includes with a slideshow feature for making various settings.
Shutting down the projector
1.
Press
POWER
or
OFF
and a confirmation message will appear prompting
you.
If you don't respond in a few seconds, the message will disappear.
2.
Press
POWER
or
OFF
a second time. The
POWER indicator light
flashes orange, the projection lamp shuts down, and the fans will continue to run for
approximately 90 seconds to cool down the projector.
To protect the lamp, the projector will not respond to any commands during the cooling process. To shorten
the cooling time, you can also activate the Quick Cooling function. See
"Quick Cooling" on page 75
for details.
3.
Once the cooling process finishes, a "
Power
Off Ring Tone
" will be heard. The
POWER
indicator light
is a steady orange and fans
stop. Disconnect the power cord from the
power outlet.
•
To turn off the power ring tone, see
"Turning off the Power
on/off ring tone" on page 47
for details.
•
If the projector is not properly shut down, to protect the
lamp, when you attempt to re-start the projector, the fans
will run for a few minutes to cool down. Press
POWER
or
ON
again to start the projector
after the fans stop and the
POWER indicator light
turns orange.
•
Lamp life results will vary depending on environmental conditions and usage.
Main menu
Sub-menu
Options
USB Reader
Slideshow
Slideshow Direction
Slide Right/Slide Down
Slideshow Timing
3 /4 /5
Repeat Slideshow
On/Off
Auto Rotation
On/Off
Best Fit
On/Off