Operation
62
Using the broadcassting function
When it comes to 1:N LAN Dispaly,there are two ways to do this function:
1.
By TCP/IP (support up to 8 porjectors, original design)
2.
By Multicast(support up to 255 projectors, this new design)
You can select channel 1, 2, 3, 4, 5,6...25 with showing the corrspondent IP(gray out).
There are 1~25 channels (25IPs) for you to select freely:
239.192.19.21~239.192.19.45
If the channel is fixed at emergency channel, when projector detects image coming in from
this channel, it will project this image automatically. There is no need to switch sources
manually.
To acticate this function:
The function requires special version of the QPresenter. Please download it from your User Manuel CD.
1.
Go to the
System Setup: Advanced
>
Network Settings
menu after opening
the OSD menu system. Press
MODE/ENTER
.
2.
Press
▼
to select
Broadcasting
and press
◄
/
►
to select
On
.
3.
Open the Advanced Settings page in the Qpresenter.
4.
Click
Yes
in the Activating Broadcasting row and click
Apply
.
Or
1.
Open the Projector Network Display System and go to the Basic page.
2.
Click
On
in the
Broadcasting
row and select a channel using the drop-down list.
3.
Open the Advanced Settings page in the Qpresenter.
4.
Click
Yes
in the Activating Broadcasting row and click
Apply
.
•
This function is only available when the Network Display source is selected.
•
The minimum system requirement for your computer is Intel Core 2 Dou 2.4GHz CPU, 2G DDR.
