Operation
49
Controlling the projector through a LAN
environment
Network Settings allow you to manage the projector from a computer using a web
browser when the computer and the projector are properly connected to the same local
area network.
Configuring the Wired LAN Settings
If you are in a DHCP environment:
1.
Take a RJ45 cable and connect one end to the LAN input jack of the projector and
the other end to the RJ45 port.
2.
Press
MENU/EXIT
and then press / until the
System Setup: Advanced
menu is
selected.
3.
Press
▼
to select
Network Settings
and press
MODE/ENTER
. The
Network
Settings
page displays.
4.
Press
▼
to select
Wired LAN
and press
MODE/ENTER
.
5.
Press
▼
to select DHCP and press
◄
/
►
to select
On
.
6.
Press
▼
to select Apply and press
MODE/ENTER
.
7.
Re-enter the
Wired LAN
page. The IP Address, Subnet Mask, Default Gateway, and
DNS Server settings will be displayed. Note down the IP address.
If the IP Address still does not display, contact your ITS administrator.
If you are in a non-DHCP environment:
1.
Repeat steps 1-4 above.
2.
Press
▼
to select DHCP and press
◄
/
►
to select
Off
.
3.
Contact your ITS administrator for information on the IP Address, Subnet Mask,
Default Gateway, and DNS Server settings.
4.
Press
▼
to select the item you want to modify and enter the value.
5.
Press
▼
to select Apply and press
MODE/ENTER
.
