BenQ SD3742, Quick Start Manual

Page: 48 / 76

Section 1: Quick Start Guide 8
Eng
lish
Rear view
No. Name Description
1 AC-INLET
For connecting the AC power cord. See "7. Connect
the power cable" on page 18 .
2 HDMI 2/DVI
Connect to the DVI digital video or HDMI digital
audio/video output of your digital source device. See
"Connecting the PC DVI input" on page 14 and
"Connecting the HDMI input" on page 15 .
3
DVI-AUDIO INPUT
L/R
Connect to the DVI digital audio output of your
digital source device. See "Connecting the PC DVI
input" on page 14 .
4 AUDIO OUTPUT
Connect to the audio input of an audio or sub-woofer
amplifier. This output is always available, however, its
level is fixed and cannot be controlled by the Volume.
See "Connecting the stereo audio output" on page 16 .
5
AV 1 Y Cb/Pb Cr/Pr
Connect each to the Component Video (Y Cb/Pb Cr/
Pr) output of an appropriate video source device. See
"Connecting the Component Video input" on page 12 .
AV 1 L/R
Connect each to the audio output of an appropriate
video source device to match that of each Component
Video input. See "Connecting the Component Video
input" on page 12 .
6 HDMI 1
Connect to the DVI digital video or HDMI digital
audio/video output of your digital source device. See
"Connecting the PC DVI input" on page 14 and
"Connecting the HDMI input" on page 15 .
1
6 2
3
4
5
Install the cable clip here
SD37_TW_EN_QSG.fm Page 8 Monday, June 23, 2008 9:51 AM