![background image](http://html.mh-extra.com/html/benq/sd3742/sd3742_quick-start-manual_2734302044.webp)
Section 1: Quick Start Guide
4
Eng
lish
4. Installing the stand
Before you start
Please pay attention to the following before installing the stand:
• For safety reasons, it is recommended that the installation be carried out by
at least two adult persons.
• The LCD panel of the display is extremely fragile and subject to damages
easily. Avoid touching the panel when installing or moving the display, and
take precautions not to let any objects come into contact with the panel. It is
recommended that you use a soft, clean and lint-free towel to protect the
display when installing.
• Pay attention to the stability of the location where the display will be placed.
Otherwise the display may topple over and result in damages and personal
injuries. Have a qualified technician secure the display appropriately in case
there is an earthquake.
Installing the stand
1. Locate the display, stand, stand
neck and screws from the
packaging, and have a suitable
screwdriver ready.
2. Lay a soft, clean, dry and lint-free
cloth on a flat, horizontal and
object-free table surface, and place
the display with the screen side
facing downward on the cloth.
Make the bottom side of the
display closer to one edge of the
table.
3. Remove the protective bottom
cover on the display as illustrated.
Store the cover appropriately in
case you need to wall-mount the
display in the future.
Display
Stand
Stand neck
Long screw
Short screw
Table
Cloth
Display
Make the bottom
side closer to the
table edge
SD37_TW_EN_QSG.fm Page 4 Monday, June 23, 2008 9:42 AM
Summary of Contents for SD3742
Page 3: ...歡迎使用 繁體中文 SD3742 彩色液晶顯示器 第一部分 快速使用指南 SD37_TW_TC book Page 1 Thursday June 19 2008 3 03 PM ...
Page 23: ...歡迎使用 繁體中文 SD3742 彩色液晶顯示器 第二部分 使用手冊 SD37_TW_TC book Page 21 Thursday June 19 2008 3 03 PM ...
Page 38: ...第二部分 使用手冊 36 繁體中文 Memo SD37_TW_TC book Page 36 Thursday June 19 2008 3 03 PM ...
Page 76: ...Reference 36 English Memo SD37_TW_EN book Page 36 Thursday June 19 2008 3 20 PM ...