![background image](http://html1.mh-extra.com/html/benq/mw727/mw727_user-manual_2734780039.webp)
Operation
39
2.
Press
MODE/ENTER
and the
3D Color Management
page displays.
3.
Highlight
Primary color
and press
◄
/
►
to select a color from among Red, Green,
Blue, Cyan, Magenta and Yellow.
4.
Press
▼
to highlight
Hue
and press
◄
/
►
to select its range. Increase in the range
will include colors consisted of more proportions of its two adjacent colors.
Please refer to the illustration to the right for
how the colors relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected
picture will be selected. Increasing its range
will include red close to yellow and red close
to magenta.
5.
Press
▼
to highlight
Saturation
and adjust
its values to your preference by pressing
◄
/
►
. Every adjustment made will reflect to the
image immediately.
For example, if you select Red and set its
value at 0, only the saturation of pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less saturated
colors; a setting of “0” removes that color from the image entirely. If the saturation is too high,
that color will be overpowering and unrealistic.
6.
Press
▼
to highlight
Gain
and adjust its values to your preference by pressing
◄
/
►
.
The contrast level of the primary color you select will be affected. Every adjustment
made will reflect to the image immediately.
7.
Repeat steps 3 to 6 for other color adjustments.
8.
Make sure you have made all of the desired adjustments.
9.
Press
MENU/EXIT
to exit and save the settings.
Resetting current or all picture modes
1.
Go to the
Picture
menu and highlight
Reset Picture Settings
.
2.
Press
MODE/ENTER
and press
▲
/
▼
to select
Current
or
All
.
•
Current
: returns current picture mode to the factory preset settings.
•
All
: returns all settings, except
User 1/User 2
in the
Picture
menu to the
factory preset settings.
RED
BLUE
GREEN
Yellow
Cyan
Magenta