![background image](http://html1.mh-extra.com/html/benq/mw727/mw727_user-manual_2734780053.webp)
Operation
53
2. Picture
men
u
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
for details.
Reference
Mode
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections listed
on the same page below. See
"Setting the User 1/User 2 mode" on
for details.
Brightness
Adjusts the brightness of the image. See
for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See
"Adjusting Contrast" on page 37
for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See
for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Tint
Adjusts the red and green color tones of the image. See
for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Sharpness
Adjusts the image to make it look sharper or softer. See
for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Brilliant Color
Adjusts white peaking while maintaining correct color presentation.
See
"Adjusting Brilliant Color" on page 37
for details.
Color
Temperature
See
"Selecting a Color Temperature" on page 38
for details.
Color
Temperature
Fine Tuning
See
"Setting a preferred color temperature" on page 38
for details.
3D Color
Management
See
"3D Color Management" on page 38
for details.
Reset picture
settings
See
"Resetting current or all picture modes" on page 39
for details.
3. Source men
u
Quick Auto
Search
See
"Switching input signal" on page 33
for details.
Color Space
Conversion
See
"Changing Color Space" on page 33
for details.
FUNCTION
DESCRIPTION