Operation
54
Description of each menu
• The default values listed in this manual, especially on pages
, are
for reference only. They may vary between the projectors due to the
continuous improvement to the products.
1. DISPLAY menu
FUNCTION
DESCRIPTION
Wall Color
Corrects the projected picture’s color when the projection surface is not
white. See
for details.
Aspect Ratio
There are four options to set the image's aspect ratio depending on your
input signal source. See
"Selecting the aspect ratio" on page 31
for
details.
2D Keystone
Corrects vertical and horizontal keystonings of the image. See
"Correcting 2D keystone" on page 24
for details.
Corner Fit
Manually adjust four corners of the image by setting the horizontal and
vertical values. See
"Adjusting Corner Fit" on page 25
for details.
Position
Displays the position adjusent page. To move the projected image, use
the directional arrow keys. The values shown on the lower position of
the page change with every key press you made until they reach their
maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Phase
Adjusts the clock phase to reduce image distortion.
This function is only available when a PC
signal (analog RGB) is selected.
H. Size
Adjusts the horizontal width of the image.
This function is only available when a PC signal (analog RGB) is
selected.
Digital Zoom
Magnifies the projected image. See
"Magnifying and searching for details"
for details.
Digital Shrink
Shrinks the image with middle point of the image fixed.
1.
Press
MENU/EXIT
and then press
/ until the
DISPLAY
menu
is selected. Press
to select
Digital Shrink
and press
MODE/
ENTER
.
2.
Press
/
to reduce the image to a desired size.