Operation
43
5.
Press
/
to move the cursor and then press
/
to enter the value.
6.
To save the setting, press
MODE/ENTER
. If you do not want to save the
setting, press
MENU/EXIT
.
7.
Press to highlight Apply and press
MODE/ENTER
.
8.
Press
MENU/EXIT
to return to
Network Settings
page, press to
highlight
AMX Device Discovery
and press
/
to select
On
or
Off
.
9.
Press
MENU/EXIT
to exit the menu.
Controlling the projector remotely through a web
browser
Once you have the correct IP address for the projector and the projector is on or in
standby mode, you can use any computer that is on the same local area network to
control the projector.
1.
Enter the address of the projector in the address bar of your browser and click
Go.
2.
The remote network operation page opens. This page (Crestron eControl)
allows you to operate the projector as if you were using the remote control or
control panel on the projector.
1
To switch input source, click on your desired signal.
The source list varies according to the connectors available on
the projector. ''Video'' stands for the Video signal.
1
2