BenQ L23 series, User Manual

Page: 9 / 19

7
Installation & Connection
Through composite cable, connect AV equipment VIDEO output termination to this machine VIDEO input,
and AV equipment AUDIO output termination to this machine AUDIO input, respectively; Press "SOURCE"
key to select "AV1" or "AV2" signal source.
Digital audio output, connect an external amplifier with optical audio decoding device.
AV1/AV2 Video Signal Connection
SPDIF-OUT
Please adjust the volume
to a suitable size, to avoid sounds excessive to affect the hearing.)
gna
If you need watch image of DV and connect your TV game machine, you can connect audio or
video output end of DV and game machine to the monitor.
Base equipment act as the picture. Equip the base
with the machine according to arrow point, and lock
the bolt tightly.
Installation for VESA Wall Mounting
1. Take off the base
2. Fasten the wall mounting board. ( The height can be confirmed by the user)
3. Fasten the wall mounting stand at the position of VESA on the rear cover with bolts.
4. Spin M4 bolts into the left-right nuts on the wall mounting stand. 3-4 mm of depth from bolts washer
to stand is recommended.
5. Hang the machine onto the slot of the wall mounting board. Then lock the two bolts on the sides.
Note : Installation method is different because of Hanging arm hardware's .
The TV speakers will be shut off when earphone is inserted into this socket.(
Through S-VIDEO/AUDIO cables to connect external AUDIO/VIDEO equipment to the
machine's AUDIO/VIDEO input port, and press "SOURCE" key to select "S-VIDEO" si
l source
If the signal source is DVD, Digital wired receiver or equipments with the YPbPr/YCbCr output,
recommends you to connect YPbPr or YCbCr output with the TV YPbPr/YCbCr input. In order to obtains
the better picture quality, at the same time, please connect its audio output with TV audio input as shown
in the following chart. If you choose the YPbPr/YCbCr signal, please set signal source selection under
YPbPr pattern.
subassembly
structure
Must install the wall pendant on firm wall surface, please do not install this machine on ceiling or
vehicles.
Earphone Socket
S-VIDEO Input Connection
AV-OUT Connection
YPbPr/YCbCr Input Connection
Base installation
Wall Mounting subassembly installation
Wall Mounting Stand
Wall Mounting Board