![background image](http://html1.mh-extra.com/html/benq/joybee-gp3/joybee-gp3_user-manual_2734576017.webp)
Introduction
17
Remote control effective range
Infra-Red (IR) remote control sensor is located
on the front of the projector. The remote
control must be held at an angle within 15
degrees perpendicular to the projector's IR
remote control sensor to function correctly. The
distance between the remote control and the
sensor should not exceed
7 meters (~ 23 feet).
Make sure that there are no obstacles between
the remote control and the IR sensor on the
projector that might obstruct the infra-red beam.
Replacing the remote control battery
1.
Pull out the battery holder.
Please follow the illustrated instructions. Push and
hold the locking arm while pulling out the battery
holder.
2.
Insert the new battery in the holder. Note
the positive polarity should face outward.
3.
Push the holder into the remote control.
•
Avoid excessive heat and humidity.
•
There may be battery damage if the battery is
incorrectly replaced.
•
Replace only with the same or equivalent type recommended by the battery manufacturer.
•
Dispose of the used battery according to the battery manufacturer’s instructions.
•
Never throw a battery into a fire. There may be danger of an explosion.
•
If the battery is dead or if you will not be using the remote control for a long time, remove
the battery to prevent damage to the remote control from possible battery leakage.
Approx. 1
5°
Summary of Contents for Joybee GP3
