73
Schedule recording
Eng
lish
-
Wkly Sun
: Start recording every Sunday
The DVD Recorder will start and stop recording on the day every week.
5. Once the date has been set, press the
Right
button to move to the hour column in the
’
Start
’ field. Press the numered buttons on the remote control to enter the start hour in 2-
digit, 24-hour format. For example, to set the start hour at 4 PM, enter ’1’, ’6’.
6. Press the
Right
button to move to the minute column in the ’
Start
’ field. Press the
numbered buttons on the remote control to enter the start minute in 2-digit format. For
example, to set the start minute as 30, enter ’3’, ’0’.
7. Press the
Right
button to move to the hour column in the ’
Length
’ field. Press the
numbered buttons on the remote control to enter the length hour in 2-digit format. For
example, to set the length as 2 hours, enter ’0’, ’2’.
8. Press the
Right
button to move to the minute column in the ’
Length
’ field. Press the
numbered buttons on the remote control to enter the length minute in 2-digit format. For
example, to set the length as 20 minutes, enter ’2’, ’0’.
9. Press the
Right
button and move to the ’
Source
’ field. Press the
Up
or
Down
button to select an appropriate video input for the recording.
Tip:
See "Manual recording" on page 67 for details of how to select a video source.
10. Press the
Right
button to move to the ’
Mode
’ field. Press the
Up
or
Down
button to select an appropriate record mode.
Tip:
See "Record mode" on page 65 for more information about record mode.
11. Press the
Right
button to move to the ’
Dest.
’ field, and then press the
Up
or
Down
button to select an appropriate record medium (
DVD
or
HDD
).
12. Check all timer information as displayed in the list.
13. Press the
Right
button to highlight ’
Save
’, and then press the
OK
button to store
the schedule setting.
14. Press the
Left
button to close the schedule list.
15. Press the
Setup
button to close the ’Setup’ menu.
16. If
DVD
is selected as the record media, load an appropriate recordable (non write-
protected) DVD into the DVD Recorder.
Note:
The schedule function will only become active while the DVD Recorder is in standby mode.
17. Press the
Power/standby
button to turn off the DVD Recorder (so that the timer
programming can take effect).