9
Introduction
Eng
lish
Front display panel
The front panel features a multifunction display located on the right. Information displayed
and their respective meanings are shown in the table below:
1
3
5
2
7
8 9 10 11 12 13 14 15 16
17 18 19
20
6
4
21
No.
Description
1
Lit when playing/recording in progress.
2
Lit when playing in progress.
3
Lit when TV antenna/cable input is selected.
4
Lit when playback/record paused.
5
Displays status messages:
TV ON?:
The DVD Recorder is currently in the initial setup mode. Refer to "Initializing
the DVD Recorder" on page 27 for initial setup details.
TRAY OPEN: Disc tray open.
CLOSING:
Disc tray closing.
READING:
Disc being read.
NO DISC:
No disc has been inserted for recording. If a disc has been inserted, perhaps
it cannot be read.
INFO:
Information on the inserted DVD is displayed on-screen.
ERASING:
The entire disc is being erased.
BLANK DISC: The disc inserted is either new or has been completely erased (no
recordings).
PROTECTED: The disc is protected against recording.
CHxx:
Current TV channel where xx represents the channel number.
DISC FULL:
The disc is full. There is no space for new recordings.
DISC ERR:
An error occurred when the title was being written.
BLOCKED:
It is not possible to close/open the disc tray.
6
Lit when recording is in progress.
7
Various segments lit to indicate the type of inserted DVD disc: DVD, DVD+R, DVD+RW.
(disc types DVD-R and DVD-RW are shown as DVD.)
8
Various segments lit to indicate the type of CD inserted: SAVCD, VCD, CD.
9
Lit when the number displaying above it is the selected title number of the DVD.
10
Lit when a recording timer has been programmed (and other functions are disabled).
11
Lit when the number displaying above it is the selected track number of the CD.
12
Lit when receiving a Nicam audio signal (in regions using PAL systems only).
13
Lit when the number displaying above it is the currently selected/playing chapter.
