BenQ DC 5530 User’s Manual
EEEEn
nnng
ggglllliiiis
ssshhhh
DPOF
27
6.4
6.4
6.4
6.4
PRINT Image Matching II
PRINT Image Matching II
PRINT Image Matching II
PRINT Image Matching II
Images include PRINT Image Matching II data (mode setting and other camera
setup information). A printer that supports PRINT Image Matching II reads
this data and adjusts the printed image accordingly, so your images come out
just the way you intended when you recorded them.
• Seiko Epson Corporation holds the copyright for PRINT Image Matching
and PRINT Image Matching II.
6.5
6.5
6.5
6.5
Exif Print
Exif Print
Exif Print
Exif Print
Exif Print is an internationally supported, open standard file format that
makes it possible to capture and display vibrant digital images with
accurate colors. With Exif 2.2, files include a wide range of shooting
condition information that can be interpreted by an Exif Print printer to
produce better looking prints.
6.6
6.6
6.6
6.6
Using USB DIRECT-PRINT
Using USB DIRECT-PRINT
Using USB DIRECT-PRINT
Using USB DIRECT-PRINT
Your camera supports USB DIRECT-PRINT. When connected directly to a
printer that supports USB DIRECT-PRINT, you can select images to be printed
and start the print operation directly from the camera.
• Use of the optional Alkaline batteries or a AC adaptor is recommended when
printing with USB DIRECTPRINT.
1.
Use the DPOF procedure on page 3
1
to specify the
images in file memory that you want to print.
2.
Load Alkaline batteries or connect the AC adaptor to the
camera.
3.
Use the USB cable that comes with the camera to connect
it to a printer.
4.
Turn on the printer.
5.
Press the camera's power button.
• This displays the print menu on the camera's monitor
screen.
6.
On the camera's monitor screen, select "Print", and then
press [SET].
• This automatically starts printing of the images you specified with the DPOF procedure.
• A message appears on the monitor screen, followed by the DPOF setting screen, if there are
no DPOF settings currently configured on the camera to control the printing operation. If
this happens, configure the required DPOF settings and then perform step 5 of the above
procedure again.
7.
The camera will turn off automatically when printing is complete.
Important!
Important!
Important!
Important!
•
The camera's monitor screen will go blank after printing starts. A blank monitor screen
does not necessarily mean that printing is complete. Check the status of your printer to
find out if printing is complete.
