BenQ DC 5530 User’s Manual
Preparing Your DC C62 for Use
6
EEEEn
nnng
ggglllli
iiissssh
hhh
e of Contents
2.1.3
2.1.3
2.1.3
2.1.3 Removing the Battery
Removing the Battery
Removing the Battery
Removing the Battery
1.
Slide the battery compartment cover on the bottom of the camera in the direction
indicated by the arrow and then swing it open.
2.
Carefully tilt the camera until the batteries slide out.
• Take care to avoid dropping the batteries.
2.1.4
2.1.4
2.1.4
2.1.4 Low Battery Indicator
Low Battery Indicator
Low Battery Indicator
Low Battery Indicator
The following shows how the battery capacity indicator on the LCD monitor changes as battery
power is used. The
indicator means that remaining battery power is low.
Note that you will not be able to record images while the battery indicator is
.
Immediately replace or charge the batteries whenever either of these indicators appears.
2.2
2.2
2.2
2.2
Turning the Camera On and Off
Turning the Camera On and Off
Turning the Camera On and Off
Turning the Camera On and Off
2.2.1
2.2.1
2.2.1
2.2.1 To turn on the camera
To turn on the camera
To turn on the camera
To turn on the camera
Press the power button, [
] (REC) button, or [
] (PLAY) button. This will cause the
green operation lamp to light momentarily, and then power will turn on. The mode the camera
enters depends on which button you pressed to turn it on.
Charge Level
High
Low
Indicator
To enter this mode at startup Press this button to turn on the camera
.
REC
Power button or [
] (REC) button.
PLAY
[
] (PLAY) button
