background image

 

 

 
 
 
 
 
 
 
 
 
 
 
1.4  

The correct way to add salt: 

A) Turn on the pool circulation pump and allow the water circulation to begin.  
B) Turn off the chlorinator. 
C) Test the current salt level of the pool. 
D) Calculate the amount of salt needed to add to the pool. 
E) Add salt to the pool around the side of the pool, allowing the salt to dilute quickly and 
evenly in the water. Do not allow salt to accumulate at the bottom of the pool. If necessary, 
stir the water at the bottom of the pool to allow the salt to completely dissolve. 
F)Run the circulation pump for 24 hours to allow the salt to distribute evenly in the pool.  
G)24 hours later, test the salt concentration of the pool again to see if it has reached the 
optimum level.  
H)When the pool salt concentration has reached the desired level, turn on the salt 
chlorinator and other equipment. Once the chlorinator has started, set the desired level of 
chlorine production. 
 
 

1.5 

Reduce the salt concentration:

 

The only way to lower the salt concentration is to drain some of the pool water and replace 
it with fresh water. 
 

1.6 

To reduce the loss of chlorine due to UV radiation on the water of the outdoor 

pool, you should add Cyanuric acid of 20-70 mg / l as a chlorine stabilizer. 
 
2.

 

Maintenance of saltchlorinator  

2.1  

Maintenance of the electrolysis cell 

To ensure proper operation of the salt chlorination plant, the electrolysis cell should be 
checked every three months after cleaning the filter. Follow the steps below to complete 
the check: 
 

A) Before removing the electrolysis cell, close the inlet and outlet valves and turn off 

the salt chlorinator for 5-10 minutes.  
 

B) After removing the electrolysis cell, check if there are flaky sediments, debris, 

light-colored layers in the inner surface.  Clean carefully with clean water . 
 

C) If there is a white calcified substance on the titanium plate, immerse the titanium 

plate in 4: 1 water hydrochloric acid to remove the calcified substance. For your safety, wear 
rubber gloves and eye protection.  
 

D) If there is significant sediment that cannot be removed on its own, contact the 

seller for professional advice. 
 
 
 
 
 
 
 
 
 

Summary of Contents for ZALX0030















Reviews: