Additional : operation and maintenance of the chlorinator
1.
The mixture and maintenance of water and salt The operational state and maintenance
of salt chlorinator
1.1
The calculation of the amount of water:
Knowing the capacity of the pool is the first step in adding salt to the pool .
Rectangular pool : length (meter) x width (meter) x average depth (meter) = pool water
capacity ( cubic meters)
Round pool: diameter (meter) x diameter (meter) x average depth (meter) x 0.785 = pool
water capacity (cubic meters)
Oval pool: length (meter) x width (meter) x average depth (meter) x 0.893= pool water
capacity (cubic meters)
1.2
The type of salt
The salt used must be "pool salt" with approval number as a precursor of biocides of the
country in which the unit is used. The sodium chloride (NaCl) in the salt must be at least
99.6% .
1.3
Adding the right amount of salt:
Most swimming pools contain a certain amount of salt, the concentration of salt in the
water depends greatly on the water source. Users can use a portable NaCl tester or a
salinity pen to test the current salt concentration of the pool.
TIPS
The normal salt concentration level of the EC Series of salt chlorinator is 3500-4500 ppm
(3.5-4.5 kg of salt per cubic meter of water)
When you first start using the EC Series, add salt to the pool according to the steps below:
A) Use a salinity meter to check the initial salt concentration in the pool.
B) Add the appropriate amount of salt, making sure to add 3.5-4.5 kg of salt for each cubic
meter of the pool.
