Benelli ZAFFERAN 250, Service Manual

Page: 59 / 187

59
4. Bulbs/Switches/Meters
Preparing documents ---------------------------4.1 Meters ------------------- 4.6
Failure diagnosis---------------------------------4.2 Main switch ------------ 4.7
Replacement of headlamp bulbs -------------4.3 Horn ---------------------- 4.8
Replacement of front steering lamp bulbs---4.4 Handlebar switch ------ 4.9
Replacement of tail lamp bulbs --------- ------4.5
4.1 Preparing documents
Note of Work
Remove the switch from the vehicle to
measure its conduction.
4.2 Failure diagnosis
When the main switch
“ON” is not light, it is
due to
•
Poor bulbs.
•
Poor switch.
•
Bad contact or broken wires.
4.3 Replacement of the Headlamp Bulbs
4.3.1 Disassembly
Remove the front shield.
Remove the fixing screws for dismantling the headlamp.
Disconnect the headlamp connector.
Remove the headlamp.
Remove the glass of the headlamp.
Fix the headlamp and rotate the socket clockwise to remove
the bulb.
4.3.2 Installation
Install the bulb in reverse order.
4.4 Replacement of Front Steering Lamp Bulbs
4.4.1 Disassembly
Remove the handlebar cowling.