BendPak XpR-10AC-168, Installation And Operation Manual

Page: 7 / 76

77
INStALLER / oPERAtoR
PLEASE READ AND FuLLy
uNDERStAND.
By PRoCEEDING you AGREE to
tHE FoLLoWING.
t
I have visually inspected the site where the lift is to
be installed and verified the concrete to be in good condi-
tion and free of cracks or other defects. I understand that
installing a lift on cracked or defective concrete could
cause lift failure resulting in personal injury or death.
t
I understand that a level floor is required for proper
installation and level lifting.
t
I understand that I am responsible if my floor is of
questionable slope and that I will be responsible for all
charges related to pouring a new level concrete slab if
required and any charges.
t
I understand that Bendpak lifts are supplied with
concrete fasteners meeting the criteria of the American
National Standard “Automotive Lifts - Safety Requirements
for Construction, Testing, and Validation” ANSI/ALI
ALCTV-2006, and that I will be responsible for all charges
related to any special regional structural and/or seismic
anchoring requirements specified by any other agencies
and/or codes such as the Uniform Building Code (UBC)
and/or International Building Code (IBC).
t
I will assume full responsibility for the concrete floor
and condition thereof, now or later, where the above
equipment model(s) are to be installed. Failure to follow
danger, warning, and caution instructions may lead to
serious personal injury or death to operator or bystander
or damage to property.
t
I understand that BendPak lifts are designed to be
installed in indoor locations only. Failure to follow instal-
lation instructions may lead to serious personal injury or
death to operator or bystander or damage to property or
lift.
Failure to follow danger, warning, and caution
instructions may lead to serious personal injury or death
to operator or bystander or damage to property.
Please read entire manual prior to installation. Do not
operate this machine until you read and understand
all the dangers, warnings and cautions in this manual.
For additional copies or further information, contact:
BendPak Inc. / Ranger Products
1645 Lemonwood Dr.
Santa Paula, CA. 93060
1-805-933-9970
www.bendpak.com
INStALLER / oPERAtoR
PRotECtIVE EQuIPMENt
Personal protective equipment helps makes installation
and operation safer, however, it does not take the place
of safe operating practices. Always wear durable work
clothing during any installation and/or service activity.
Shop aprons or shop coats may also be worn, however
loose fitting clothing should be avoided. Tight fitting leath-
er gloves are recommended to protect technician hands
when handling parts. Sturdy leather work shoes with steel
toes and oil resistant soles should be used by all service
personnel to help prevent injury during typical installation
and operation activities.
Eye protection is essential during installa-
tion and operation activities. Safety glasses
with side shields, goggles, or face shields
are acceptable. Everyday eyeglasses only
have impact resistant lenses, they are not
safety glasses. Back belts provide support
during lifting activities and are also helpful in providing
worker protection. Consideration should also be given
to the use of hearing protection if service activity is per-
formed in an enclosed area, or if noise levels are high.
tHIS SyMBoL PoINtS out IMPoRtANt SAFEty INStRuCtIoNS WHICH IF Not FoLLoWED
CouLD ENDANGER tHE PERSoNAL SAFEty AND/oR PRoPERty oR youRSELF AND otHERS
AND CAN CAuSE PERSoNAL INJuRy oR DEAtH. READ AND FoLLoW ALL INStRuCtIoNS IN
tHIS MANuAL BEFoRE AttEMPtING to oPERAtE tHIS MACHINE.