BendPak HD-7MZ, Installation And Operation Manual

Page: 9 / 56

9
MODEL HD-7MZ HD-7PXW HD-7PXN
Lifting Capacity 7,000 lbs / 3,175 kg 7,000 lbs / 3,175 kg 7,000 lbs / 3,175 kg
A – Overall Width 110" / 2,800 mm 110" / 2,800 mm 100" / 2,546 mm
B – Outside Length 198" / 5,028 mm 198" / 5,028 mm 198" / 5,028 mm
C – Overall Length (includes ramps) 213" / 5,688 mm 213" / 5,688 mm 213" / 5,688 mm
D – Height of Columns 158" / 4,010 mm 158" / 4,010 mm 158" / 4,010 mm
E – Minimum Runway Height 5" / 125 mm 5" / 125 mm 5" / 125 mm
F – Maximum Rise 140" / 3,560 mm 140" / 3,560 mm 140" / 3,560 mm
G – Maximum Lifting Height 145" / 3,681 mm 145" / 3,681 mm 145" / 3,681 mm
H – Width Between Columns 100" / 2,547 mm 100" / 2,547 mm 90" / 2,292 mm
I – Runway Width 19" / 482 mm 19" / 482 mm 19" / 482 mm
J – Width Between Runways (*) Narrow N/A 38" / 963 mm 37.5" / 955 mm
J – Width Between Runways (*) Wide 44" / 1,121 mm 44" / 1,121 mm 44" / 1,121 mm
K – Runway Centerline (*) Narrow N/A 56.75" / 1,445 mm / 1,437 mm
K – Runway Centerline (*) Wide 63" / 1,603 mm. 63" / 1,603 mm 63" / 1,603 mm
L – Outside Edge of Runways (*) Narrow N/A 75.5" / 1,927 mm 75.5" / 1,919 mm
L – Outside Edge of Runways (*) Wide 82" / 2,085 mm 82" / 2,085 mm 82" / 2,085 mm
M – Drive Thru Clearance 86.5" / 2,201 mm 86.5" / 2,201 mm 97" / 2,467 mm
N – Length of Runways 188" / 4,788 mm 188" / 4,788 mm 188" / 4,788 mm
Minimum Wheelbase @ Rated Capacity 135" / 3,429 mm 135" / 3,429 mm 135" / 3,429 mm
Minimum Wheelbase @ 75% Capacity 115" / 2,921 mm 115" / 2,921 mm 115" / 2,921 mm
Minimum Wheelbase @ 50% Capacity 95" / 2,413 mm 95" / 2,413 mm 95" / 2,413 mm
Minimum Wheelbase @ 25% Capacity 80" / 2,032 mm 80" / 2,032 mm 80" / 2,032 mm
Locking Positions 30 30 30
Lock Spacing Every 4" / 101 mm Every 4" / 101 mm Every 4" / 101 mm
Lifting Time 80 Seconds 80 Seconds 80 Seconds
Standard Motor(**) 220 VAC, 60 Hz, 1 Ph 220 VAC, 60 Hz, 1 Ph 220 VAC, 60 Hz, 1 Ph
* This dimension may be limited with the addition of rolling jacks.
** Special voltages available on request. Specifications subject to change without notice.
*IMPORTANT NOTE*
Check Diagonal Measurements to Ensure
Square Layout Diagonal Measurements Must Be Equal.
FLOOR PLAN