24
SAFETY AIR LINE ROUTING
NOTE:
CUT THE PROVIDED 1/4” AIR LINE TUBING WITH A SHARP BLADE TO LENGTHS AS REQUIRED. TUBING MUST
BE CUT SQUARE WITH ALL PLASTIC BURRS REMOVED.
CAUTION:
REMOVING THE AIR TUBING FROM THE COMPRESSION FITTINGS WILL CAUSE DAMAGE TO THE TUBING
ITSELF. USE OF A DAMAGED AIR LINE
MAY RESULT IN SAFETY LOCK FAILURE.
Power
Unit
Flex
Tube
Push
Button Air
Valve
NOTE: FEED AIR LINE TUBING THROUGH THE RETAINER TUBING
ON THE OUTSIDE OF THE CROSSTUBES
To Air Cylinder
To Air Cylinder
To Air Cylinder
To Air Cylinder
NOTE: FEED AIR LINE TUBING THROUGH THE RETAINER TUBING
ON THE INSIDE OF THE POWER SIDE RAMP
Retainer
Tubing
Retainer
Tubing
“Tee”
Fitting
“Tee”
Fitting
“Tee”
Fitting
PAY CAREFUL ATTENTION TO KEEP
AIR LINE CLEAR OF ANY PINCH
POINTS. IMPROPER ASSEMBLY MAY
RESULT IN SAFETY LOCK FAILURE.
AN MINIMUM AIR SUPPLY
PRESSURE OF 30 PSI OF 3 CFM
WILL BE REQUIRED FOR PROPER
SAFETY LOCK ACTIVATION.
A MAXIMUM OF 125 PSI IS ALLOWED
FOR THE AIR SAFETY LINES.
FAILURE TO REGULATE TO A
MAXIMUM PRESSURE OF 125 PSI
MAY RESULT IN BURSTING OF THE
AIR LINES OR MALFUNCTION OF
THE SAFETY LOCKS
