6
1. Carefully remove the crating and packing
materials.
CAUTION! Be careful when cutting steel
banding material as items may become loose and fall
causing personal harm or injury.
2. Check the voltage, phase and proper amperage
requirements for the motor shown on the motor plate.
Wiring should be performed by a certified electrician only.
IMPORTANT SAFETY INSTRUCTIONS
Read these safety instructions entirely!
IMPORTANT NOTICE
Do not attempt to install this lift if you have never been trained on basic automotive lift installation procedures.
Never attempt to lift components without proper lifting tools such as forklift or cranes.
Stay clear of any moving parts that can fall and cause injury.
INTRODUCTION
• READ AND UNDERSTAND all safety warning
procedures before operating lift.
• KEEP HANDS AND FEET CLEAR. Remove hands
and feet from any moving parts. Keep feet clear of lift
when lowering. Avoid pinch points.
• KEEP WORK AREA CLEAN. Cluttered work areas
invite injuries.
•
Consider work area environment. Do not expose equip-
ment to rain.
DO NOT use in damp or wet locations.
Keep area well lighted.
• ONLY TRAINED OPERATORS should operate this
lift. All non-trained personnel should be kept away from
work area. Never let
non-trained personnel come in
contact with, or operate lift.
• USE LIFT CORRECTLY. Use lift in the proper manner.
Never use lifting adapters other than what is approved
by the manufacturer.
• DO NOT override self-closing lift controls.
• REMAIN CLEAR of lift when raising or lowering vehicle.
• CLEAR AREA if vehicle is in danger of falling.
• ALWAYS ENSURE that the safeties are engaged
before any attempt is made to work on or near vehicle.
• DRESS PROPERLY. Non-skid steel-toe footwear is
recommended when operating lift. Keep hair, loose
clothing, fingers, and all parts of body away from
moving parts.
• GUARD AGAINST ELECTRIC SHOCK.
This lift must be grounded while in use to
protect the operator from electric shock.
Never connect the green power cord wire
to a live terminal. This is for ground only.
• DANGER! The power unit used on this
lift contains high voltage. Disconnect
power at the receptacle before per-
forming any electrical repairs. Secure
plug so that it cannot be accidentally
plugged in during service.
• WARNING! RISK OF EXPLOSION.
This equipment has internal arcing or
sparking parts which should not be
exposed to flammable vapors. This
machine should not be located in a recessed area or
below floor level.
• MAINTAIN WITH CARE. Keep lift clean for better and
safer performance. Follow manual for proper lubrication
and maintenance instructions. Keep control handles
and/or buttons dry, clean and free from grease and oil.
• STAY ALERT. Watch what you are doing. Use com-
mon sense. Be aware.
• CHECK FOR DAMAGED PARTS. Check for align-
ment of moving parts, breakage of parts or any condi-
tion that may affect its operation. Do not use lift if any
component is broken or damaged.
• NEVER remove safety related components from the lift.
Do not use lift if safety related components are dam-
aged or missing.
•
BendPak requires all operators to read ANSI/ALI
ALIS,
Safety Requirements for Installation and
Service of Automotive Lifts
.
•
Use only as described in this manual. Use only
manufacturer’s recommended attachments.
• ALWAYS WEAR SAFETY GLASSES. Normal
eyeglasses only have impact resistant lenses; they
are not safety glasses.
SAVE THESE INSTRUCTIONS
