89000109-002
xVue Touch Installation Manual
Rev 2
Page 6-25
© Honeywell International Inc. Do not copy without express permission of Honeywell.
For Use in Non-Certified Aircraft
Situation Display. The GPS Navigator must be connected via the RS-232 Serial Interface and the
technician must configure the GPS Navigator properly to provide the correct data.
The availability of the analog VHF Navigator is enabled through the KSD 100EXP configuration. When
enabled, the KSD 100EXP will allow selection of the Analog VHF Navigator and will process and monitor
all analog signals provided by the Analog VHF Navigator.
The default configuration for the VHF Navigator analog interface is “Not Connected”. In this
configuration, the option for the pilot to select it as a navigation source is disabled and no monitoring is
provided for this interface.
6.2.3.1 GPS Navigation Source
(1) From the GPS/NAV sub-menu, Figure 6-31, press the GPS1 button to display the GPS1 sub-menu,
Figure 6-32 GPS 1 Sub-Menu
(2) Press the button for the installed LRU from the GPS1 sub-menu, Figure 6-32.
(3) Press the Back-Arrow button to return to the GPS/NAV sub-menu.
(4) Verify the selected LRU is reflected correctly on the GPS 1 button, shown in Figure 6-32.
