Bender UNIMET 300ST, Operating Manual

Page: 10 / 62

System description
10 TGH1365en/10.2012
3.2 Standard-compliant tests
The UNIMET® 300ST carries out measurements and tests according to the following standards (see
also chapter "7.1 Standards"):

IEC 62353:2007-05

DIN EN 62353 (VDE 0751-1):2008-08

ÖVE/ÖNORM EN 62353:2009-01-01

DIN VDE 0701-0702 (VDE 0701-0702):2008-06

ÖVE E8701-1:03-01
The UNIMET® 300ST carries out the following measurements and tests:

Visual inspection

System voltage

Measurement of current consumption and calculation of power consumption

PE resistance for Protection Class I equipment

Insulation resistance

Equipment leakage current according to the differential measurement method or by direct
measurement

Equipment leakage current -Alternative method

Touch or PE conductor current according to the differential measurement method or by direct
measurement

Functional test
3.3 System components
The following accessories are supplied with the UNIMET® 300ST test system:
1
Carrying bag For the storage and transport of the test system
and its accessories. Accessories are kept in the side
pocket and the inside pocket.
2
Test probe For testing accessible parts of the DUT
3
Test terminal (safety claw grip) For connection to accessible parts of the DUT
4
Interface cable (null modem
cable) Enables data to be exchanged between the test
system and a PC (RS-232 interface)
5
Calibration certificate Proof of the calibration carried out in the factory
6
Technical device manual on CD Test system manual
7
UNIData300 PC software (CD) UNIData300 software for
- backing up the device catalogue on a PC
- transferring a firmware update to the
UNIMET® 300ST
8
VK701-6 Adapter Schuko
(German) For testing extension cables and socket strips
9
VK701-7 Adapter for non-
heating appliances For testing device connecting cables
10
USB1.1 RS-232 converter Enables data exchange between the RS-232
interface of the UNIMET® 300ST and the USB port
of a PC (with installation CD)