Bender UNIMET 300ST, Operating Manual

Page: 53 / 62

53 TGH1365en/10.2012
7. Data
7.1 Standards
7.1.1 Application standards
The UNIMET
®
300ST carries out measurements and tests according to the following standards:

DIN EN 62353 (VDE 0751-1):2008-08
"Medical electrical equipment - Recurrent test and test after repair of medical electrical
equipment (IEC 62353:2007); German version EN 62353:2008"

DIN VDE 0701-0702 (VDE 0701-0702):2008-06
"Inspection after repair, modification of electrical appliances - Periodic inspection on electrical
appliances - General requirements for electrical safety"

ÖVE/ÖNORM EN 62353:2009-01-01
"Medical electrical equipment - Recurrent test and test after repair of medical electrical
equipment (IEC 62353:2007)"
7.1.2 Design standards
The requirements of the following standards were taken into account in the design of the UNIMET
®
300ST:

DIN VDE 0404-1 (VDE 0404-1):2002-05
"Testing and measuring equipment for checking the electric safety of electric devices - Part 1:
General requirements"

DIN VDE 0404-2 (VDE 0404-2):2002-05
"Testing and measuring equipment for checking the electric safety of electric devices - Part 2:
Testing equipment for tests after repair, change or in case of repeat tests"

DIN VDE 0404-3 (VDE 0404-3):2005-04
"Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3:
Equipment for periodical tests and tests prior to commissioning medical electrical devices or
systems"