Bender UNIMET 300ST, Operating Manual

Page: 17 / 62

Operation and configuration
17 TGH1365en/10.2012
Select the name of a test engineer (log on) as follows:
To enter the name of a new test engineer:
SELECT TEST ENGINEER
Test engin.: ( 3/ 4)
HENRY STONE
Select: , Confirm:
1. Call up
“Select test eng.” function
2. Use the arrow keys to select
the test engineer
3. Confirm with ENTER key
-----------------------------
Test eng. logged on:
HENRY STONE
-----------------------------
Selected test engineer is
displayed for approx. 3 seconds
ESC
1. Exit
2. Select test eng.
3. Enter new test eng
4. Delete test eng.
ENTER TEST ENG. NAME:
_
Char.: A-Z, 0-9, -. /
Exit: ESC Next:
1. Select “Enter new test eng”
2. Use the arrow keys to select the first characters
and then press the ENTER key
4. After entering the last character,
press and hold down the
ENTER key for approx. 3 seconds.
3. Select all the remaining characters also
Briefly press the ESC key
= edit previous character
Press and hold down the ESC key
= Exit menu without making changes
The new test engineer is
saved and logged on
3 s
ENTER TEST ENG. NAME:
JOHN MEYER
Char.: A-Z, 0-9, -. /
Exit: ESC Next:
ESC
ESC
ESC
ESC
1. Exit
2. Select test eng.
3. Enter new test eng
4. Delete test eng.
1. Exit
2. Select test eng.
3. Enter new test eng
4. Delete test eng.