Settings
Settings
isoNAV685-D_D00215_02_M_XXEN/04.2017
35
10.1
(5.2.3) Summer time
Summer time can be considered in the following settings:
10.1
(5.2.4) Date
Based on the selected date format you can set the current date.
10.1
(5.2.5) Format (date)
Select the appropriate date format you want to be displayed:
•off
No automatic change between summer time and standard time.
•DST
Daylight Saving Time
Automatic change between summer and standard time according to
North American regulation.
North American summer time begins on each second Sunday in
March at 02:00 local time by setting the clock forward by one hour
from 2:00 to 03:00 local time. Summer time always ends the first Sun-
day in October at 03:00 local time by setting the clock back one hour
from 3:00 to 2:00.
•CEST
Central European Summer Time
Automatic change between summer time and standard time accord-
ing to Central European regulation.
Central European summer time begins on each last Sunday in March
at 02:00 CEST by setting the clock forward by one hour from 2:00 to
03:00. Central European summer time always ends on the last Sun-
day in October at 03:00 CEST by setting the clock back one hour
from 3:00 to 2:00.
When set to DST or CEST, changing between summer time and normal time
is only done on the date of the official time change.
•dd.mm.yy
day, month, year
•mm-dd-yy
month, day, year
10.1
(5.2.6) NTP
Select if you would like to synchronise the current time via NTP. You have to configure the
NTP server in order to use this function (see
).
10.1
(5.2.7) NTP server
Set the IP address of the NTP server.
10.1
(5.2.8) UTC
Set the time according to UTC (coordinated world time). For Germany, set +1 for winter-
time (MEZ) and +2 for summer time (MESZ).
10.1
(5.3) Interface
Set the parameters for the connection of other devices to the ISOMETER® in the interface
menu:
10.1
(5.3.1) Write access
Set whether the device can be parameterised externally via Modbus or web server. Dis-
playing and reading out data via Modbus and web server is always possible, regardless of
this setting.
10.1
(5.3.2) Ethernet
Set the parameters for communication with other devices via the Ethernet interface.
The Ethernet interface can be used for communication with Modbus, web server and
BCOM.
10.1
(5.3.2.1) DHCP
Select whether you want to use automatic address assignment via your DHCP server.
When the automatic IP address assignment is activated, the IP address, subnet mask and
the standard gateway are assigned automatically. When the automatic IP address assign-
ment is deactivated, you have to make these settings manually in the menu.
The IP address can be viewed in the “Info“ menu (see
).
•on
Synchronisation via NTP server is activated.
•off
Synchronisation via NTP server is deactivated.
•Allow
Allow external parameter setting.
•Deny
Refuse external parameter setting.
•on
Activate automatic IP address assignment.
•off
Deactivate automatic IP address assignment.
