9
FTC470XDP_D00111_00_M_XXEN/02.2015
2. Safety instructions
2.1 Work activities on electrical installations
All work activities necessary for installation, commissioning or work activities during operation
of electrical devices or systems are to be carried out by adequately skilled personnel.
Observe the relevant regulations applying to work on electrical installations, in particular DIN
EN 50110 or its subsequent regulations.
If the equipment is used outside the Federal Republic of Germany, the respective national
standards and regulations are to be observed.
2.2 Address setting and termination
A prerequisite for proper functioning of the FTC470XDP protocol converter is its correct address set-
ting and termination.
Ensure correct address setting and termination of the FTC470XDP. For details refer to the chapter ba-
sic configuration on page 23.
Unprofessional work activities on electrical installations may result in
personal injury!
Addresses assigned twice may lead to serious malfunctions in BMS or
PROFIBUS-DP systems.
