Bender B91016330, Manual

Page: 4 / 48

Table of contents
4 isoGEN523_D00320_04_M_XXEN/06.2018
3.2.10 Measuring and response times .................................................................. 15
3.2.11 Factory settings FAC ....................................................................................... 16
3.2.12 External, combined test or reset button T/R ......................................... 16
3.2.13 Fault memory .................................................................................................... 16
3.2.14 Interface/protocols ........................................................................................ 17
4. Installation and connection ................................................................ 19
4.1 Installation ......................................................................................................... 20
4.2 Connection of the device ............................................................................. 20
4.3 Commissioning ................................................................................................ 22
5. Parameter overview ............................................................................. 23
5.1 Response value setting ................................................................................. 23
5.2 Configuration of the relay operating mode ........................................... 23
5.2.1 Relay signalling assignment "r1" and "r2" ............................................... 24
5.2.2 Fault memory configuration ...................................................................... 24
5.3 Interface configuration ................................................................................. 25
5.4 Time configuration ......................................................................................... 25
5.5 Function configuration ................................................................................. 26
5.6 Measured value description ........................................................................ 26
6. Data access using the BMS protocol ................................................. 27
7. Data access using the Modbus RTU protocol .................................. 28
7.1 Reading out the Modbus register from the ISOMETER® .................... 28
7.1.1 Command of the master to the ISOMETER® .......................................... 28
7.1.2 The ISOMETER® answers the master ......................................................... 28
7.2 Writing the Modbus register (parameter setting) ............................... 28
7.2.1 Command of the master to the ISOMETER® .......................................... 29
7.2.2 The ISOMETER® answers the master ......................................................... 29
7.3 Exception code ................................................................................................. 29
7.3.1 Structure of the exception code ................................................................ 30