27
Bend-Tech Dragon A400
Assembly Manual
Assembling the Dragon
03
3.10 Install the Cable Track Tray
REQUIRED TOOLS & EQUIPMENT
•
5/32 Allen Wrench
Locate the Cable Track Front Supports. Install them between in the indicated spots located
nearest the head of the machine using two 1/4-20 x 5/8” BHCS and two 1/4-20 T-Nuts. There
are two locations identified by arrows. Installed each support between the arrows.
Locate the Cable Track Beam Mount. Install the mount at the third set of arrows from the head
of the machine. This position is closer to the bottom of the rail than the position of the front
supports. Use four 1/4 x 5/8” BHCS and four 1/4-20 T-Nuts.
