14
Bend-Tech Dragon A400
Assembly Manual
Tools and Equipment
02
02
Tools and Equipment
2.1 Tools
The Installer(s) should ensure the proper complement of tools are on hand to assemble the
Dragon A400. Bend-Tech does not recommend attempting to assemble the machine without
the tools listed in this chapter.
2.1.1 Tool List
The following are the recommended tools needed to perform the complete assembly
procedure.
• Forklift
• Cordless drill/driver
• T25 bit
• Support Blocks
• Side cutters
• Tin snips
•
3/16 in. Allen wrench
•
⅛ in. Allen wrench
•
5/16 in. Allen wrench
•
5/32 in. Allen wrench
•
7/32 in. Allen wrench
• Level (laser, digital or bubble)
• Ratchet
•
9/16 in. socket
•
9/16 in. wrench
•
1/2 in. socket
•
1/2 in. wrench
•
5/8 in. wrench
• Rubber mallet or Dead Blow plastic
hammer
• Tape measure
• Zip ties
• Clamp
• Magnet Tool (Provided)
• Bridge Rack (Provided)
