18
Bend-Tech Dragon A400
Assembly Manual
Assembling the Dragon
03
REQUIRED TOOLS & EQUIPMENT
• Drill
• T25 Bit
Disassemble the crate first. Use a cordless driver and T25 bit to remove the screws that fasten
the top of the crate to the sides of the crate. Lift the top off and set it aside. Unfasten the first of
the larger crate sides, including the fasteners that secure the 2x4 braces, and set it aside.
! Caution !
When removing the 2x4 braces, ensure someone is holding them to prevent the
2x4s from falling onto the machine or other personnel.
Unfasten and remove the 2x4 braces at the top of the crate. Next, unfasten and remove the
crate ends. Set these aside. Remove the remaining large crate side last, and set it aside.
3.3 Getting Started
REQUIRED TOOLS & EQUIPMENT
•
Cordless Drill with 1/2 in. Socket
• Tin Snips
•
3/16 Allen Wrench
• Forklift
• Support Blocks
Removing the Dragon A400 components from the crate properly, and keeping them in order,
is critical to achieving the quickest, most seamless installation possible. As shipped, the
components of the machine will be secured to the each other and the crate.
