14
4. Clip the 2 chute clean-out tool clips on the
side of the middle frame, and insert the
chute clean-out tool in the clips (Figs. 4-5).
5. Clip on the 2 cable clips on the frame,
and insert the cable inside of the cable
clips (Figs. 6).
Cable clips
Cable
Chute
Clean-Out
Tool
Chute
Clean-Out
Tool Clips
DISCHARGE CHUTE ASSEMBLY
1. Loosen the knob to lift the chute
deflector (Fig.7).
2. Left the chute deflector and lock it
securely onto the discharge chute (Fig.8).
3. Raise or lower the chute deflector
to the desired height of the snow
stream and tighten the knob (Fig.9).
NOTE! Do not overtighten the knob.
5554-514
22" CORDLESS SNOW BLOWER
Fig. 4
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 5
