15
CHUTE CRANK ASSEMBLY
1. Remove the cotter pin from the lower
chute crank (Fig.10).
2. Install the lower crank rod by inserting it
into the opening at the back of the housing
with holes aligned (Fig.11).
3. Secure the lower chute crank in place
with the cotter pin (Fig.12).
4. Remove the cotter pin on the crank rod
connector by hand (Fig.13).
5. Slide the upper chute crank through the
rubber ring located on the middle frame
(Fig.14).
6. Slide the upper chute crank into the
crank rod connector (Fig.15).
Upper Chute
Crank
Upper Chute
Crank
Crank Rod
Connector
Rubber Ring
Cotter Pin
Cotter Pin
Cotter Pin
Align the
holes
Lower Chute
Crank
Lower Chute
Crank
Crank Rod
Lower Chute
Crank
Fig. 10
Fig. 11
Fig. 12
Fig. 14
Fig. 15
Fig. 13
