manualshive.com logo in svg

Benchmark 5554-514, Manual

Share
Download
Benchmark 5554-514 Manual Download Page 8

7

7.    Do not exhaustively discharge batteries. Exhaustive discharge will damage  

the battery cells. The most common cause of exhaustive discharge is lengthy 

storage or non-use of partially discharged batteries. Stop working as soon as the 

performance of the battery falls noticeably or the electronic protection system 

triggers. Place the battery pack in storage only after it has been fully charged.

8.    Protect the battery and the tool from overloads. Overloads will quickly result in 

overheating and cell damage inside the battery housing even if this overheating  

is not apparent externally.

9.    Avoid damage and shocks. Immediately replace batteries that have been 

dropped from a height of more than one meter or those that have been  

exposed to violent shocks, even if the housing of the battery pack appears to 

be undamaged. The battery cells inside the battery may have suffered serious 

damage. In such instances, please read the waste disposal information for 

proper battery disposal.

10.   If the battery pack suffers overloading and overheating, the integrated  

protective cutoff will switch off the equipment for safety reasons. If this  

situation happens, stop the tool and let the battery cool down for a few  

minutes before restarting.

 

  IMPORTANT! Do not press the ON/OFF trigger any more if the protective  

cut-off has been activated. This may damage the battery pack.

11.   Use only original battery packs. The use of other batteries poses a fire risk  

and may result in injuries or an explosion.

INFORMATION ABOUT THE CHARGER AND THE CHARGING PROCESS

1.    Please check the data marked on the rating plate of the battery charger.  

Be sure to connect the battery charger to a power supply with the voltage 

marked on the rating plate. Never connect it to a different mains voltage.

2.    Protect the battery charger and its cord from damage. Keep the charger and 

its cord away from heat, oil and sharp edges. Have damaged cords repaired 

without delay by a qualified technician or call the customer service center at 

1-833-818-4111.

3.    Electrical plugs must match the outlet. Never modify the plug in any way.  

Do not use any adapter plugs with grounded tools. unmodified plugs and  

matching outlets will reduce the risk of electric shock.

4.    Keep the battery charger, battery pack(s) and the cordless tool out of the  

reach of children.

5.    Do not use the supplied battery charger to charge other cordless tools.
6.    During periods of heavy use, the battery pack will become warm. Allow the 

battery pack to cool to room temperature before inserting it into the charger  

to recharge.

7.    Do not overcharge batteries. Do not exceed the maximum charging times. 

These charging times only apply to discharged batteries. Frequent insertion  

of a charged or partially charged battery pack will result in overcharging and  

cell damage. Do not leave batteries in the charger for days on end.

Summary of Contents for 5554-514



























Reviews:

No comments

Brands by name

Popular brands

Load more brands