manualshive.com logo in svg

Benchmark 5554-514, Manual

Share
Download
Benchmark 5554-514 Manual Download Page 19

18

2.  While depressing the safety switch button, pull the ON/OFF switch bail toward 

you. Once the machine powers on, release the safety switch button and begin  

operation (Fig. 21). The machine can only be started by depressing the safety 

switch button first, followed by squeezing the ON/OFF switch bail; reverse  

operation will not start the machine.

3.  To power off, release your grip on the ON/OFF switch bail.
4.  The LED light can be used to illuminate the surface in front in the dark. When  

the battery pack located in the battery housing well, the LED light will light after 

the machine gets started. The LED light will delay 30 seconds to turn off after the 

machine get power off. 

MOVING THE MACHINE & PLOWING THE SNOW

WARNING: 

Foreign objects, such as rocks, broken glass, nails, wire, or string, 

can be picked up and thrown by the snowblower, causing serious personal injury. 

Remove all foreign objects from the area to be plowed before operating the  

snowblower.
1.    Keep the area of operation free of foreign objects that can become thrown 

by the rotating paddle. Perform a thorough inspection of the area since some 

objects may be hidden from view by surrounding snow. If the snowblower hits 

an obstruction or picks up a foreign object during use, stop the snowblower, 

disconnect the extension cord, remove the obstruction, and inspect the unit  

for damage. Repair or replace any damaged part before restarting and  

operating the unit.

2.    Keep children, pets, and bystanders away from the area of operation. Be aware 

that the normal noise of the machine when turned on may make it difficult for 

you to hear approaching people.

3.    When moving the snowblower, use the wheels on one side as the pivot point. 

Slightly tilt the snowblower on this pivot point to move it forward or backward.

4.    Start your clearing path near the electrical outlet and work outward, throwing 

snow in a back and forth motion. To clear in the opposite direction, step over 

the cord and pivot the snowblower on its wheels. Make sure to overlap clearing 

paths.

5554-514

22" CORDLESS SNOW BLOWER

Summary of Contents for 5554-514



























Reviews:

No comments

Brands by name

Popular brands

Load more brands