9
Installation-
Positioning of the Fire
200799_1
Note: Before positioning the fire, connect the fire to a power supply.
The next step is to
position
the fire in the opening.
Angle the fire into the opening, as shown in
Diagram 10,
taking care
not to damage the bottom long edge of the finished opening.
Once clear of the opening, position the fire towards the back of the opening, so it is clear of the front edge
and the
MDF Framework
in the opening is exposed, as shown in
Diagram 11.
This will enable the magnet
bracket to be fitted. See
page 10
Ensure the product is connected to the power supply before proceeding further.
Diagram 10
Diagram 11
Note:
Dependant on the model
purchased the fire may require a
two adult person lift.
