5
Assembly- Pre-fabricated
Chimney Breast
200799_1
Before commencing further with the installation please ensure the 2 X
Fire Support Brackets
have been
attached to the
MDF Framework
, these set the minimum depth required for installation-
238mm
. As shown
on
Page 4
.
Decide on the installation height of the fire and construct the studwork around the
MDF Framework.
The
studwork construction in
Diagram 2
is for guidance only.
Ensuring the front face of the
MDF framework
is flush with the studwork, fix in position through the pre-drilled
holes in the
MDF Framework
. 3 x fixing holes in the top and bottom and 1 x fixing hole in each side.
Diagram 2
MDF
Framework
Fire Support
Brackets
Studwork
Finishing
Plasterboard, skim and decorate the chimney breast, before installing the fire. As shown in
Diagram 3.
Note: The fire is installed in a later procedure.
Diagram 3
