11
Installation-
Fixing the Fire
200799_1
Diagram 14
Finished
Wall
Surface
Finally drill a pilot hole through the locking holes in the
Angle Brackets
into the
MDF Framework
behind.
Using
4 x No.8 x15mm Domed-Head Screws
fix the fire in position,
as shown in Diagram 16.
Diagram 16
Pull the fire forward to the front of the opening and centralise.
Align the tabs on the angle brackets with the face of the finished wall surface, as shown in
Diagram 14.
Fix through the
slot
in each bracket, into the pre-drilled holes in the
MDF Framework
using
4 x No.8 x15mm
Domed-Head Screws
, whilst aligning the tabs with the face of the finished wall surface, as shown in
Diagram 15.
Finished
Wall
Surface
Finished
Wall
Surface
Tab
Tab
Diagram 15
